Florida AHJ
Solar permit requirements in Un-incorporated Seminole, FL
Solar installations in Un-incorporated Seminole, Florida, must adhere to specific structural and electrical standards. Solar Design Lab provides permit-ready plansets designed to meet these local requirements.
Requirements at a glance
- Design wind speed
- 140 mph (ASCE)
- Exposure category
- B
- High-velocity hurricane zone
- No
- Submission format
- digital_separate
- Separate discipline files
- Yes
What Un-incorporated Seminole expects on a solar permit
Permit applications require digital submission with separate discipline files. Structural designs must account for 140 mph wind speed, Exposure Category B, and Risk Category II per FBC 2023 and ASCE 7-22, and must include a structural analysis report sealed by a Florida-licensed Professional Engineer. Electrical plans must show the neutral bonded to the Grounding Electrode System at the system gateway, with equipment ratings and conductor schedules matching manufacturer data sheets per SCC Chapter 40 Appendix A 107.3.5. Installations involving ESS require interconnected smoke or heat alarms per NFPA 855 and protective bollards if located within 36 inches of a driving path.
- [structural] Design structural components for 140 mph wind speed, Exposure Category B, Risk Category II, per FBC 2023 and ASCE 7-22.
- [electrical] Ensure equipment ratings and conductor schedules on plans exactly match manufacturer data sheets per SCC Chapter 40 Appendix A 107.3.5.
- [fire] Install interconnected smoke alarms in ESS locations; if in a garage or unsuitable area, install a listed interconnected heat alarm per NFPA 855 (2020) 15.9.2.
- [structural] Provide bollards for ESS within 36 inches of a driving path. Bollards must be 36-inch high, 3-inch diameter SCH 80 iron pipe with 12-inch embedment or an 8x8x0.25-inch steel base plate.
- [structural] Provide a structural analysis report or letter sealed by a Florida-licensed Professional Engineer.
- [electrical] Explicitly show the neutral bonded to the Grounding Electrode System (GES) at the system gateway (e.g., Gridboss) on the single-line diagram.
Un-incorporated Seminole building department
- Website:
- https://www.seminolecountyfl.gov
Always confirm current requirements and fees directly with the Un-incorporated Seminole building department before submitting. Website located via automated research, verify before relying on it.
Design a permit-ready Un-incorporated Seminole planset with these rules baked in.
Solar Design Lab derives the SLD, electrical, and structural live as you draw, and checks your design against Florida AHJ requirements before you submit. First planset free.