Florida AHJ
Solar permit requirements in Un-incorporated Lake, FL
Solar installations in Un-incorporated Lake, Florida, must adhere to specific structural and electrical standards. These requirements ensure compliance with local building codes for all residential and commercial solar projects.
Requirements at a glance
- Design wind speed
- 140 mph (ASCE)
- Exposure category
- B
- Ground snow load
- 0 psf
- High-velocity hurricane zone
- No
- Fire access pathways
- Required
- Submission format
- Digital submission
- Separate discipline files
- No
What Un-incorporated Lake expects on a solar permit
Permit applications must reflect design parameters of 140 mph wind speed and Exposure Category B, with a ground snow load of 0 psf. Structural plans for ground mounts require a Florida Professional Engineer's digital signature, and all designs must comply with FBC 2023 and ASCE 7-22. Documentation must include the total panel count, system wattage, and site plans identifying the utility meter, MSP, inverters, and AC disconnects. Labels must be reflective with a minimum 3/8 inch letter height per NFPA 1. For SECO Energy territory, a lockable, visible-break AC disconnect is required. Interior energy storage systems must include interconnected smoke alarms and specific NFPA 855 signage. Submissions are accepted via digital delivery.
- [electrical] For SECO Energy utility territory, provide a single, lockable, visible-break AC disconnect that isolates the entire system (including batteries); if supply-side connected, it must be service-entrance rated.
- [fire] Clearly indicate if the ESS is interior or exterior; interior ESS requires interconnected smoke alarms (in bedrooms, outside bedrooms, and garage) and NFPA 855:4.3.5.2 signage on the garage door.
- [documentation] Label all structures on the site plan with their specific occupancy/use, and explicitly map the locations of the utility meter, MSP, inverters, and AC disconnect.
- [structural] Ground mount systems require site-specific structural plans stamped with a third-party verifiable Florida Professional Engineer's digital signature.
- [structural] Structural designs must comply with FBC 2023 / ASCE 7-22, utilizing 140 mph wind speed and Exposure B.
- [labeling] Ensure all labels are made of reflective material with a minimum letter height of 3/8 inch per NFPA 1.
- [documentation] Clearly display the total number of panels and total system wattage on the plans.
Un-incorporated Lake building department
- Website:
- https://www.lakecountyfl.gov
Always confirm current requirements and fees directly with the Un-incorporated Lake building department before submitting. Website located via automated research, verify before relying on it.
Design a permit-ready Un-incorporated Lake planset with these rules baked in.
Solar Design Lab derives the SLD, electrical, and structural live as you draw, and checks your design against Florida AHJ requirements before you submit. First planset free.