Florida AHJ
Solar permit requirements in St. Petersburg, FL
Solar projects in St. Petersburg, Florida, must adhere to specific local building and safety regulations. Solar Design Lab provides permit-ready plansets designed to meet these municipal standards.
Requirements at a glance
- Design wind speed
- 150 mph (ASCE)
- Exposure category
- B
- Ground snow load
- 0 psf
- High-velocity hurricane zone
- No
- Fire access pathways
- Required
- Submission format
- Digital submission
- Separate discipline files
- No
What St. Petersburg expects on a solar permit
Structural mounts must be designed for 150 mph wind speed, Exposure B, and Risk Category II per FBC 2023. Submissions require electrical and structural certifications signed by a Florida-licensed PE referencing FL Statute 377.705, along with a site plan identifying all component locations. The AHJ requests both single combined PDFs and plans separated into individual pages. Additional safety requirements include reflective PV system labels with 3/8 inch minimum letter height per NFPA 1, a rapid shutdown pathway placard, and interconnected smoke or heat alarms in rooms and attached garages where ESS is installed.
- [structural] Design structural mounts for 150 mph wind speed, Exposure B, and Risk Category II per FBC 2023.
- [documentation] Include electrical and structural certifications signed by a Florida-licensed PE explicitly referencing FL Statute 377.705.
- [labeling] Ensure PV system labels are reflective and have a minimum letter height of 3/8 inch per NFPA 1.
- [fire] Install interconnected smoke or heat alarms in rooms and attached garages where ESS is installed.
- [documentation] Provide a site plan that clearly identifies the physical locations of all components shown on the electrical line diagram.
- [submittal_format] Verify PDF upload requirements before submitting; the AHJ has requested both single combined PDFs and plans separated into individual pages on recent projects.
Design a permit-ready St. Petersburg planset with these rules baked in.
Solar Design Lab derives the SLD, electrical, and structural live as you draw, and checks your design against Florida AHJ requirements before you submit. First planset free.